Best Mattresses for Trundle Beds: 6 Low-Profile Picks

Thin white mattress on a wooden pull-out trundle below a daybed, with a tape measure on the floor

A trundle mattress has to fit twice. It needs to sit squarely on the lower platform when a guest uses it, then slide back under the main bed with room to spare. A mattress can pass the height check and still be too wide for the rails or too short for the tray.

We chose six low-profile Twin and Twin XL mattresses for different lower-deck limits. Start with the maximum thickness in your frame’s instructions. Then compare the mattress’s listed dimensions with the space inside the tray and above its support surface. That gives you a shortlist worth comparing by feel and construction.

Quick Comparison of Our Six Trundle Mattress Picks

Listed dimensions are for the linked mattress versions, in length × width × thickness.
Mattress Best for Listed size Construction Skip if
Linenspa 5-Inch Gel Foam Twin 5-inch Twin limit74 × 38 × 5 in.Firm foamYour frame requires a 75-inch mattress.
Lucid 5-Inch Firm Gel Foam Twin XL Low-profile Twin XL79 × 37.5 × 5 in.Firm foamYour frame requires a full 80-inch length.
Zinus 6-Inch Green Tea Twin 6-inch foam Twin75 × 39 × 6 in.Memory foamThe inside width is under 39 inches.
Linenspa 6-Inch Innerspring Twin XL Firm innerspring Twin XL80 × 39 × 6 in.Bonnell coilsYour frame has a 5-inch cap or a narrower tray.
Serta 7-Inch Cooling Gel Foam Twin 7-inch foam pick74.5 × 38 × 7 in.Medium-firm foamThe frame cap is below 7 inches.
Linenspa 8-Inch Hybrid Twin 8-inch hybrid74 × 39 × 8 in.Medium-firm foam and springsYour frame lacks confirmed 8-inch clearance or has less than 39 inches inside.

Swipe within the table to see the fit checks.

On this page

Measure the Lower Trundle Before Buying

  1. Find the frame’s mattress specification. Look for the lower deck’s required size, thickness and support surface. A maximum is a limit. A recommended thickness is the maker’s stated fit for that model. If the instructions give a recommendation alone, check with the frame maker before going thicker.
  2. Measure the usable length and width. Measure inside the rails and between any stops or retaining brackets. Check the narrowest point the mattress passes as you slide the tray in. Compare these numbers with the listed mattress dimensions and the frame maker’s fit requirements. An extra inch of width can matter, and a shorter mattress can leave a gap.
  3. Measure the space above the lower deck. Start at the top of the slats or solid platform where the mattress rests. Measure up to the lowest rail, crossbar or bracket along the roll-in path. Include the protector and fitted sheet if they’ll stay on the bed. Check clearance along the full route and at the fully closed position.
Side and overhead views show the lowest clearance above the trundle deck and the usable length and width between the tray stops
Measure from the surface that holds the mattress. A low crossbar can set the limit even when the opening at the front looks taller.

Example. Say you measure 6.5 inches from the lower deck to the lowest obstruction and plan to keep 0.25 inches of bedding on the mattress. That leaves 6.25 inches of measured space for the mattress. If the frame manual caps the mattress at 6 inches, use 6 inches as your limit. A 6-inch mattress plus the bedding would leave about a quarter inch in this example. Once the mattress has expanded, check that the tray closes without brushing the frame.

If the title and the dimensions table disagree, check with the mattress maker before ordering for a tight opening. Milliard’s Deluxe Dual-Sided Twin, for example, is sold as a 5-inch mattress, and the maker’s dimensions table lists 5.25 inches. A quarter inch can decide whether the bed closes.

Best for a 5-Inch Twin Limit

1. Linenspa 5-Inch Gel Memory Foam Twin

We’d start here for a shallow Twin tray that accepts a 74-inch mattress and a firm foam feel.

Linenspa 5-inch Gel Memory Foam Twin mattressLinenspa 5-inch Gel Memory Foam Twin dimensions of 74 by 38 by 5 inches
Linked size
Twin
Listed dimensions
74 × 38 × 5 in.
Construction
Gel memory foam and support foam
Listed feel
Firm

A five-inch profile gives you more room under the main bed than the six- and seven-inch foam picks here. It’s a straightforward option when the lower bed comes out for occasional use and the frame’s height limit drives the decision.

Pros

  • Five-inch profile for shallow trays.
  • 38-inch listed width.

Cons

  • Firm feel and less room for cushioning layers than thicker foam picks.

Who Should Skip This

Skip it if your frame requires a 75-inch mattress or the protector and sheet put it over your measured clearance.

View Linenspa 5-Inch Twin on Amazon

Best Low-Profile Twin XL

2. Lucid 5-Inch Firm Gel Memory Foam Twin XL

We’d choose this firm foam option when the lower tray needs extra length and has a five-inch cap.

Lucid 5-inch Firm Gel Memory Foam Twin XL mattress with a white top and dark side panelLucid 5-inch Firm Gel Memory Foam Twin XL dimensions of 79 by 37.5 by 5 inches
Linked size
Twin XL
Listed dimensions
79 × 37.5 × 5 in.
Construction
Gel memory foam and support foam
Listed feel
Firm

It adds five inches of listed length over the first pick at the same thickness. The 37.5-inch width is also narrower than either six-inch option. That’s useful only if the frame accepts those dimensions. Select the five-inch Firm version, since the product family includes thicker options.

Pros

  • Longer sleep surface at five inches thick.
  • Fits the width requirement of some narrower Twin XL trays.

Cons

  • Listed dimensions fall short of nominal 80 × 38-inch Twin XL.

Who Should Skip This

Skip it if your frame requires an 80-inch length or the narrower mattress leaves more space at the sides than the frame allows.

View Lucid 5-Inch Twin XL on Amazon

Best 6-Inch Foam Twin

3. Zinus 6-Inch Green Tea Memory Foam Twin

We’d choose the Zinus for a Twin lower deck with room for a six-inch all-foam mattress at its listed 39-inch width.

Zinus 6-inch Green Tea Memory Foam Twin mattress on a wood bedZinus 6-inch Green Tea Memory Foam Twin dimensions of 75 by 39 by 6 inches
Linked size
Twin
Listed dimensions
75 × 39 × 6 in.
Construction
Memory foam
Listed feel
Medium or medium-firm, depending on the listing field

This is the only six-inch foam Twin in our lineup. Its listed 75-inch length is useful when a 74-inch model would leave too much space at the end. The tradeoff is the additional inch of width compared with the five-inch Linenspa Twin.

Pros

  • Six-inch foam construction.
  • 75-inch listed length for compatible Twin trays.

Cons

  • The listed width exceeds the space in a 38-inch tray.
  • The listing gives two different descriptions of firmness.

Who Should Skip This

Skip it if the inside of your tray is less than 39 inches wide or your manual sets a five-inch maximum.

View Zinus 6-Inch Twin on Amazon

Best Firm Innerspring Twin XL

4. Linenspa 6-Inch Innerspring Twin XL

We’d pick this for a lower Twin XL bed that accepts the full 80-inch listed length and a six-inch innerspring.

Linenspa 6-inch Innerspring Twin XL mattressLinenspa 6-inch Innerspring Twin XL dimensions of 80 by 39 by 6 inches
Linked size
Twin XL
Listed dimensions
80 × 39 × 6 in.
Construction
Bonnell coils with a foam layer
Listed feel
Firm

The coil base makes it a useful comparison with the Lucid foam Twin XL. Choose between them by the length, width and thickness your frame can take first, then decide which construction you prefer.

Pros

  • Full 80-inch listed length.
  • Coil option at a six-inch profile.

Cons

  • Needs more width and height than our Lucid Twin XL pick.

Who Should Skip This

Skip it if the tray measures under 39 inches across or the mattress cap is five inches.

View Linenspa 6-Inch Twin XL on Amazon

Best 7-Inch Foam Pick

5. Serta 7-Inch Cooling Gel Memory Foam Twin

We’d choose the Serta when a compatible Twin trundle has room for seven inches and you want a listed medium-firm all-foam option.

Serta 7-inch Cooling Gel Memory Foam Twin mattress beside its branded boxSerta 7-inch Cooling Gel Memory Foam Twin dimensions of 74.5 by 38 by 7 inches
Linked size
Twin
Listed dimensions
74.5 × 38 × 7 in.
Construction
Gel memory foam and foam support core
Listed feel
Medium-firm

This Twin uses the same listed width as our five-inch Linenspa. It gives you a thicker foam option on a 38-inch tray that can take the extra height. Check the clearance with the bedding you plan to leave in place.

Pros

  • 38-inch listed width.
  • Medium-firm foam option where seven inches fit.

Cons

  • The extra height reduces the room left for a protector and sheet.

Who Should Skip This

Skip it if the frame’s mattress cap is below seven inches or the mattress and any retained bedding cannot clear the roll-in path.

View Serta 7-Inch Twin on Amazon

Best 8-Inch Hybrid

6. Linenspa 8-Inch Hybrid Twin

We’d choose this foam-and-spring hybrid for a Twin lower deck with confirmed space for an eight-inch mattress.

Linenspa 8-inch Hybrid Twin mattressLinenspa 8-inch Hybrid Twin dimensions of 74 by 39 by 8 inches
Linked size
Twin
Listed dimensions
74 × 39 × 8 in.
Construction
Memory foam and springs
Listed feel
Medium-firm

It’s our thickest pick and the only hybrid. That makes it an option when you’ve already established that there’s room for springs plus foam at this height. Use the dimensions of the linked Twin when comparing it with your tray.

Pros

  • Combines foam and springs in an eight-inch profile.
  • Listed medium-firm feel.

Cons

  • Requires more stowed height than any other pick here.

Who Should Skip This

Skip it if the lower mattress limit is under eight inches, the tray has less than 39 inches inside, or its fit calls for a 75-inch length.

View Linenspa 8-Inch Hybrid Twin on Amazon

Match the Frame You Have

Start with the model name or number in your instructions. Here’s how the lower-mattress guidance differs among four frames in our trundle bed comparison.

  • Max & Lily Twin Bed with Trundle. The product specifications cap the lower Twin mattress at five inches. Start with five-inch options and verify the lower tray’s required dimensions.
  • AFI Barcelona Twin XL with Twin XL Trundle. AFI recommends six inches for the lower bed. Verify the listed Twin XL’s length and width against the tray.
  • Camaflexi Mid-Century Twin Daybed with Trundle. The lower Twin has a seven-inch maximum. Measure the actual space if you intend to leave bedding on a seven-inch mattress.
  • Amazon Basics Full Daybed with Twin Trundle. The product description lists an eight-inch maximum for the lower Twin mattress. Verify the usable tray width and clearance in the stowed position, especially if you leave bedding on.

Before ordering, check the frame’s deck against the mattress maker’s support guidance. A mattress can clear the rails and still require a different support surface or slat spacing.

Check Finished Heights on a Pop-Up Trundle

If you want two level sleeping surfaces, compare the raised lower deck height plus its mattress thickness with the main deck height plus its mattress thickness. For example, a main deck 14 inches off the floor with a six-inch mattress finishes at 20 inches. A raised lower deck at 13 inches would need seven inches of mattress to reach the same height.

Check that the seven-inch mattress can still stow, that it falls within the lower deck’s specifications, and that the raised trundle is designed for your intended setup. If the frame limits the lower mattress to six inches, expect a difference in finished height with the same main mattress. Our trundle bed guide explains how roll-out and pop-up beds differ.

Trundle Mattress FAQs

Should I buy a five-inch or six-inch trundle mattress?

When the frame caps the mattress at five inches, choose one within that limit. If the frame allows six, compare both thicknesses after accounting for anything you’ll leave on the mattress. A thinner model gives you more room to slide the tray shut.

Can I use an eight-inch mattress on a trundle?

Yes, if the exact lower deck permits it and there’s enough space to close the tray. Check both even if the main bed takes a thicker mattress or the lower platform pops up.

Are Twin, Twin XL, and short Twin interchangeable?

Check the actual length and width before substituting. A standard Twin is nominally 75 × 38 inches and a Twin XL is 80 × 38 inches. For comparison, Leesa’s trundle mattress lists 73 × 38 inches before its stated manufacturing variation. Measure the tray and confirm the length and gaps its maker allows.

Can I leave sheets on the mattress?

Try closing the tray with the fitted sheet and protector in place. Keep bulky blankets and pillows elsewhere, and pull any loose fabric away from the wheels and rails before you close it.

Can an adult sleep on a trundle mattress?

Check the guest’s fit on the lower sleep surface and use the lower frame’s own load rating. If entry height matters, a pop-up may be easier to get into. Check whether the rating includes the mattress and bedding.

Can I buy a Full mattress for the lower deck?

Yes, when the frame specifically calls for a Full on the lower deck. Some Full daybeds pair the main bed with a Twin trundle, so look for a separate size and height specification for the lower mattress.

Our Final Picks by Frame Limit

For a five-inch cap, start with the Linenspa Twin or Lucid Twin XL, depending on the usable tray dimensions. At six inches, compare the Zinus foam Twin and the Linenspa innerspring Twin XL by size and construction. Choose the seven-inch Serta foam or eight-inch Linenspa hybrid when you’ve confirmed the extra height in both the manual and the frame.

Similar Posts